OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2047

Reductant Injection Valve Circuit/Open (Bank 1 Unit 1)

P2047 covers the electrical path of the first DEF dosing valve on Bank 1, which in nearly every SCR layout is the only one. The controller watches the valve's low-side driver and flags an open load: a broken wire, an unplugged connector or a burnt-out coil. GM's 6.6 L LML table expects roughly 200 kOhm between pin and load for 3 s (Type A); GM's 2018 diesel table counts 30 faulty samples out of 60. Ford's 2023 diesel summary reads 2.6 to 3.4 V on the idle output within 2 s. Ram found loose terminals at the injector plug, Volvo VNR trucks a harness chafed by a loose heat shield. On the LGH/LML GM ranks P2047 as a tamper-type fault, so the warning sequence toward a speed limit starts early; with no DEF sprayed, NOx rises.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 47

Possible causes

  • Loose, corroded or pushed-out terminals at the DEF injector plug high
  • Harness wire broken or chafed through near the exhaust medium
  • Open coil inside the DEF injector medium
  • Faulty output stage or software in the engine/dosing control module low

Symptoms

  • MIL on, often together with a DEF system warning
  • Speed limitation countdown after continued driving
  • Increased NOx, failed emissions inspection

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2047

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication