OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2046

Reductant Temperature Sensor A Circuit Intermittent

P2046 records short dropouts or jumps in the signal of reductant temperature sensor A. No manufacturer documents this code publicly. Deutz, the clearest user of the P2042 group, lists only an open line, a ground fault, both shorts and a plausibility error for this sensor, but no intermittent entry. How such a check can work is shown by GM's tank sensor test P205E in the 2025 DEF controller: it fails when the reading moves by more than 4 °C inside a ten-sample window, three times out of nine. CARB requires input circuits to be monitored for faults of this kind (1968.2, paragraph (f)(15.2.1)). In practice the cause is mostly a terminal losing contact under vibration or DEF residue in the connector. Wiggle tests with live data help; the tank sensor has its own code, P205E.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 46

Possible causes

  • Terminal losing contact under vibration high
  • Corrosion from DEF residue in the connector medium
  • Harness rubbing through intermittently on the frame medium

Symptoms

  • MIL that comes and goes
  • Unsteady DEF temperature in live data

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2046

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication