OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P203E

Reductant Level Sensor A Circuit Intermittent/Erratic

P203E stands for a level sensor A signal that keeps dropping out or jumping. FCA explains it best: Ram HD trucks with the 6.7L Cummins (2019–2021) carry an ultrasonic level sensor that needs an air gap above the fluid. Bulletin 18-034-21 and STAR case S2025000001 name an overfilled tank as the main trigger, because the echo no longer returns; residual ice or urea crystals in the focus tube after hard frost do the same. Returned parts were mostly found free of faults. The test only runs with ambient and tank above about 4 °C, so the fix is draining 2 to 3 gallons or thawing the tank, then about 15 min of steady highway driving. Jeep and Ram 3.0L EcoDiesel software updates (18-018-14, 18-018-15) also cover P203E. Steady circuit faults belong to P203C/P203D.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 3E

Possible causes

  • DEF tank overfilled, no air space for the ultrasonic echo high
  • Residual ice or urea crystals covering the sensor high
  • Intermittent contact at the tank connector medium
  • Control unit software needing an update low

Symptoms

  • MIL and Service DEF message
  • DEF gauge jumps or reads 0 % with fluid in the tank
  • Warning returns after filling or after a cold night

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P203E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication