P203C
Reductant Level Sensor A Circuit Low
P203C reports a level sensor A signal stuck at the bottom of its range. On GM's 6.6L LML and the 2014 Cruze diesel this is level contact 1: the tank electronics apply a test pulse, and a reading under 0.17 V for more than 3 s with over 8 V supply counts as a short to ground (LML Type A, Cruze Type B). GM's 2017/2018 diesel tables (1.6L Cruze, 2.8L Colorado) use a raw value below 2 in 40 of 50 samples, Type A, and the 2025 DEF controller sets the code on piezo excitation faults reported by the smart sensor. FCA lists P203C on 2014–2015 Ram 2500 to 5500 with the Cummins 6.7L and a radio frequency level sensor in the pump module; the fix was the pump/level module. GM's bulletin 12-06-04-002C ranks P203C among DEF codes that keep warnings active.
Possible causes
- Signal wire shorted to ground or chafed at the tank high
- Level sensor or pump/level module internally faulty medium
- DEF crept into the connector and bridges the terminals medium
Symptoms
- MIL and DEF warning
- DEF gauge reads empty or not at all
- Speed or restart limit after a warning period
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P203C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- gsi.ext.gm.com/gmspo/mode6/pdf/2014/14OBDG10 Engine Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2014/14OBDG04 Engine Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2017/17OBDG04 Engine Diagnostics.pdf
- static.nhtsa.gov/odi/tsbs/2015/MC-10148941-9999.pdf
- static.nhtsa.gov/odi/tsbs/2014/MC-10138701-9999.pdf