OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P202C

Reductant Tank Heater Control Circuit High

P202C is the high-side fault of the DEF tank heater circuit: the module sees a value above the allowed range, as when the wire touches battery positive or an element that conducts far too well. On the Touareg 3.0 TDI of model year 2014, Volkswagen flags it when the element's conductance at the start of heating exceeds 0.62 S, below roughly 1.6 Ω, which hints at an internal short. On 2025 Ram 2500 to 5500 with the 6.7 L Cummins, Chrysler's bulletin 08-076-26 lists P202C next to other DEF heater and pressure codes and cure them with new software for the DEF control unit; there the fault came from calibration, not from hardware. With a real short the fuse may blow or the driver protect itself, so the tank stays unheated. In winter the system may then warn and count down to a speed limit.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 2C

Possible causes

  • DEF control unit calibration (software update on some models) medium
  • Heater element with internal short, resistance too low medium
  • Heater control wire shorted to battery voltage low

Symptoms

  • Malfunction indicator lamp on
  • Service DEF message, later speed limited
  • Heater fuse may blow

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P202C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication