Powertrain
generic / SAE
P2021
Intake Manifold Runner Position Sensor/Switch Circuit High (Bank 2)
The IMRC position sensor on bank 2 reports a voltage above the upper threshold — usually a short to positive or an open ground.
SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 21
Possible causes
- Signal shorted to positive high
- Sensor ground open medium
- Connector pins corroded - high contact resistance low
Inspection / repair
- Difficulty: medium
- DIY: possible
- Estimated cost: 80–400 €
- Estimated time: 0.5–2 h
- Component: imrc position sensor b2
- Component: imrc wiring
- MIL / check engine light
- emissions-relevant
- drive cycle required
Sources
References
sae:J2012