OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P201E

Intake Manifold Runner Control Actuator Internal Performance (Bank 2)

P201E says the electronic flap actuator serving bank 2 has detected or caused an internal malfunction; the wires to it are not the issue. No manufacturer documents P201E publicly, and only engines with a separate smart actuator per bank can set it. On bank 1 GM lists the matching code P201D for its 2017–2018 diesels inside the group of faults that disable swirl control, but without its own thresholds, so even there the actuator decides what counts as internal. CARB asks for a functional check of every valve or flap system that alters charge motion. If P201E appears together with low supply (P201C) or circuit codes for bank 2, those come first; on its own it usually means the actuator, or a manifold with built-in actuator, must be replaced. Expect the bank 2 flaps to stay parked until the fault is gone.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number– / 1E

Possible causes

  • Electronics inside the bank 2 actuator failed high
  • Bank 2 flaps binding and overloading the actuator medium
  • Moisture inside the actuator housing low

Symptoms

  • Malfunction indicator lamp on
  • Little or no change in drivability

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P201E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication