P200F
Catalyst System Over Temperature (Bank 2)
P200F flags excessive temperature in the catalyst of bank 2, so it needs an engine whose second bank feeds its own catalyst with its own temperature sensor. No manufacturer documents P200F publicly; GM and Ford describe only the bank 1 code P200E for their single-path diesels, with limits around 800 to 850 °C behind the oxidation catalyst or a link to a stationary regeneration that runs hot. A twin-path system would apply such a limit per side. Overheating confined to one bank usually has a cause on that bank: an injector dribbling fuel, misfire on those cylinders, or a sensor reading too high. Comparing both banks helps: if only bank 2 is hot, look at its cylinders and sensor first. CARB treats such temperature records as protection, not as proof that the catalyst still converts, so efficiency is monitored separately.
Possible causes
- Fuel slipping into the bank 2 exhaust (dribbling injector, misfire) high
- Bank 2 exhaust temperature sensor reading too high medium
- Regeneration overheating on bank 2 low
Symptoms
- Malfunction indicator lamp on
- Possible power reduction
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P200F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.