P200B
Intake Manifold Runner Performance (Bank 2)
P200B judges whether the flaps of bank 2 move as commanded and settle where they should; it needs a V engine whose second bank has its own flap set or position feedback. The clearest public user is FCA's 3.0 V6 EcoDiesel: bulletins for the Jeep Grand Cherokee and Ram 1500 from 2014 onward, and 18-002-23 for the 2020 Ram 1500 with the third-generation engine, list P200A and P200B together and cure them by reprogramming the PCM, together with the cold-start variants P2D2D/P2D2E. That points to calibration as one cause rather than hardware alone. FCA publishes no thresholds; GM's inline-engine bank 1 check P200A shows the typical approach, comparing learned end stops with a window and timing each stroke. Before replacing a manifold, check for a software update, then the actuator and linkage on bank 2 only.
Possible causes
- Engine software with an available update (FCA 3.0 EcoDiesel) medium
- Bank 2 actuator slow or failed medium
- Flaps on bank 2 sticking from soot or carbon medium
Symptoms
- Malfunction indicator lamp on
- Often no noticeable change in driving
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P200B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.