P2003
Diesel Particulate Filter Efficiency Below Threshold (Bank 2)
P2003 is set when the particulate filter of bank 2 lets too much soot slip through, which almost always points to a cracked, partly melted, hollowed-out or bypassed core. Separate filters per bank are uncommon, so the code is rare. No manufacturer documents P2003 publicly; GM and Ford explain the detection under the bank 1 code P2002: older systems judge the flow resistance of a freshly regenerated filter, newer ones use a resistive PM sensor behind it, which signals too early when soot gets past the filter. CARB requires the system to catch a filter whose leakage pushes PM beyond the limit and also one whose substrate is missing. A forced regeneration will not cure a broken filter; it has to be replaced. The warning lamp may be the only sign, with soot at the tailpipe if the leak is large.
Possible causes
- Bank 2 filter core cracked or melted after an overheated regeneration high
- Filter on bank 2 removed, emptied or bypassed medium
- PM sensor or differential pressure measurement on bank 2 giving false values low
Symptoms
- Malfunction indicator lamp on
- Visible soot at the tailpipe with a large leak
- Engine performance normally unaffected
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2003
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.