OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0EFE

Battery Charger A Input Voltage Sensor C Circuit High

P0EFE is stored when channel C of charger A reports more input voltage than a household or station supply can deliver. No manufacturer documents P0EFE publicly. For sensor A, GM's 2011 Volt charger module trips P0D40 when the measured AC peak exceeds 422 V for 160 ms of a 200 ms window, rated Type A; this window is far shorter than the one for the low code, presumably because overvoltage endangers the input stage. In a divider front end like the one in TI's 11 kW design, an open lower resistor or a short to the converter reference pushes the signal toward the 3.3 V limit and causes exactly this reading. Real overvoltage from the grid is rare, so the measuring channel inside the charger is the main suspect once plugs have been checked. AC charging stops at once.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / FE

Possible causes

  • Open lower resistor in the voltage divider of channel C high
  • Sense signal shorted to the converter reference or a supply rail medium
  • Actual overvoltage or surge from the supply low

Symptoms

  • AC charging stops within seconds of starting
  • Displayed supply voltage unrealistically high
  • Charging fault message

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0EFE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication