P0EFB
Battery Charger A Input Voltage Sensor C Circuit
P0EFB flags an electrical fault on the third AC input voltage channel of on-board charger A, sensor C. Channel A reports through P0D3D to P0D41, channel B through P0EF7 to P0EFA; a third channel fits chargers that read each phase of a three-phase supply separately. This is the catch-all circuit code, used when the signal is unusable without being sorted into range, low or high (P0EFC, P0EFD, P0EFE). No manufacturer documents P0EFB publicly, and GM's hybrid tables for 2011, 2012 and 2014 to 2019 never list the matching circuit code P0D3D either, catching wiring faults on sensor A only through its low and high checks. In TI's 11 kW reference design every phase is scaled by a resistor chain and centred at 1.65 V in a 3.3 V converter, so a dead channel is easy to spot. AC charging is refused or limited.
Possible causes
- Failed measuring channel C on the charger board (divider, amplifier or converter input) high
- Open or loose sense connection for this phase inside the charger or at the AC inlet harness medium
- Charger software marking a valid channel as faulty low
Symptoms
- AC charging does not start or is limited
- Possible reduced charging power on three-phase stations
- Charging fault shown in the cluster or app
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0EFB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.