P0EFA
Battery Charger A Input Voltage Sensor B Circuit High
With P0EFA, the signal from the second input voltage sensor of charger A, sensor B, lies above the plausible window. No manufacturer documents P0EFA publicly. GM's comparable check for sensor A, P0D40 in its 2019 plug-in hybrid tables, trips at a duty cycle of 92 % or more but below 100 %, or at exactly 0 %, in 30 of 40 samples, and is rated Type B. Electrically this points to a short to a supply voltage, an open signal line pulled up by the input stage, or a defective sensing stage inside the charger. Since the measuring channel normally sits on the charger board, the charger itself becomes the prime suspect once plugs and pins have been checked. AC charging is refused or ends soon after it started; the low-side sibling is P0EF9.
Possible causes
- Defective measuring stage on the charger board high
- Open signal line pulled high by the input circuit medium
- Signal shorted to a supply voltage low
Symptoms
- AC charging refused or ends after a few seconds
- Charging fault message
- Indicated charging power implausible
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0EFA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.