P0EF8
Battery Charger A Input Voltage Sensor B Circuit Range/Performance
P0EF8 is set when input voltage sensor B of charger A delivers a value that is electrically valid but wrong for the situation. No manufacturer documents P0EF8 publicly. GM's rationality test for sensor A, P0D3E in its 2019 plug-in hybrid tables, illustrates the idea: while the car moves at 16 km/h or more, when no plug can be connected, the sensor duty ratio must stay between 8 and 12 %; if 60 of 80 samples taken every 25 ms fall outside, the code is stored as Type B. A charger with two input channels can additionally compare them with each other or with the supply voltage reported by the station. Offset drift or a partial fault in the sensing electronics is the likely cause, wiring less so. Charging may stop or continue at reduced power.
Possible causes
- Offset drift of the voltage sensing electronics in the charger high
- Partial internal fault of the charger input stage medium
- Charger software misjudging the plausibility window low
Symptoms
- AC charging interrupted or slower than expected
- Code may set while driving without any charging attempt
- Charging fault message
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0EF8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.