P0EF7
Battery Charger A Input Voltage Sensor B Circuit
P0EF7 stands for an electrical fault in the second input voltage sensor of on-board charger A, the measuring channel that reads the AC supply voltage coming from a wallbox, station or household outlet. Chargers designed for several phases or split-phase supply may carry more than one such channel; the first one, sensor A, uses P0D3D to P0D41. This general code applies when the signal is unusable but not classified as range, low or high, which are P0EF8, P0EF9 and P0EFA. No manufacturer documents P0EF7 publicly. In its 2019 plug-in hybrid tables GM reads sensor A through a pulse duty ratio, so a broken line shows up as a stuck 0 % or 100 %. CARB requires plug-in vehicles to monitor charging system performance. As long as the supply voltage cannot be confirmed, AC charging is refused or limited.
Possible causes
- Fault in the voltage sensing stage inside the charger high
- Open or high-resistance signal line between sensor and controller medium
- Corroded low-voltage connector at the charger low
Symptoms
- AC charging does not start or stops shortly after start
- Charging fault message in the cluster or app
- DC fast charging usually unaffected
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0EF7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.