OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0EF6

Drive Motor C Temperature Sensor Over Temperature

P0EF6 is not an electrical fault: the drive motor C temperature sensor delivers a believable value, but that value has passed the motor's protection limit. No manufacturer documents P0EF6 publicly. For motor B on the 2016 Cadillac ELR, GM sets P0A35 when the temperature exceeds 149 °C and does not fall back below a reset threshold, Type A, and only while the range check P0A31 is passing. Ford's 2019 hybrids set P0A2F at a coil temperature above 140 °C or transmission oil above 115 °C. Causes are mostly on the cooling side, such as low coolant or oil, a failed pump or a clogged cooler, but long full-load phases or a winding with shorted turns also heat the motor. Torque of motor C is cut until it cools; sensor circuit faults belong to P0EF1 to P0EF5.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / F6

Possible causes

  • Low coolant or oil level, or air in the motor cooling circuit high
  • Failed coolant or oil pump, or clogged cooler medium
  • Long full-load phases such as towing, track use or steep climbs medium
  • Shorted turns in the stator winding generating extra heat low

Symptoms

  • Clearly reduced power until the motor has cooled down
  • Warning about drive system overheating
  • MIL on (manufacturer-dependent)

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0EF6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication