OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0EF5

Drive Motor C Temperature Sensor Circuit Intermittent/Erratic

P0EF5 covers a drive motor C temperature signal that jumps or drops out for short moments instead of staying wrong. Because of the thermal mass of a traction motor, the winding temperature can only change slowly; a step of many degrees within milliseconds therefore points to the wiring and not to the motor. Loose or corroded pins at the motor connector, leads chafing near moving parts or a cracked sensor lead are typical. No manufacturer documents P0EF5 publicly, and its drive motor A and B siblings P0A2E and P0A34 are not listed in the published Ford and GM tables either; Ford only runs open and short checks on its coil sensors with a 200 ms monitoring window. CARB requires hybrid systems to watch electric motor performance. Warnings that appear and vanish, sometimes with brief power cuts, are typical.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / F5

Possible causes

  • Loose or corroded pins in the motor connector high
  • Harness chafing at brackets or moving parts medium
  • Cracked sensor lead inside the motor that opens with vibration or heat low

Symptoms

  • Warning lamp that comes and goes
  • Short power interruptions of motor C, often on rough roads
  • Jumping motor temperature in the live data

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0EF5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication