P0EF2
Drive Motor C Temperature Sensor Range/Performance
P0EF2 flags a plausibility error of the drive motor C temperature sensor: its signal is electrically fine, yet the value does not fit what the controller expects. No manufacturer documents P0EF2 publicly. GM shows a typical check for drive motor B on the 2016 Cadillac ELR: after at least 21,600 s with the propulsion system inactive, the motor thermistor may differ by no more than 20 °C from the average of power electronics coolant and transmission fluid temperature, otherwise P0A31 sets as Type A. Ford compares motor coil, generator coil and transmission fluid temperatures on its 2019 hybrids after 200 minutes key-off, with limits of 10 °C and 30 °C. A drifting thermistor, a sensor that has lost contact with the winding or a high-resistance connection fails such a cold-start comparison.
Possible causes
- Thermistor characteristic drifted with age high
- Sensor no longer in thermal contact with the winding medium
- Corroded pin adding resistance and shifting the reading medium
- Comparison sensor such as coolant or oil temperature reading wrong low
Symptoms
- Warning lamp after a long standstill, often at the first start of the day
- Usually no noticeable drivability change at first
- Power limitation of motor C in some cases
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0EF2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.