P0EF1
Drive Motor C Temperature Sensor Circuit
P0EF1 is the general circuit code for the temperature sensor of drive motor C, the third traction motor on vehicles with three or more electric machines. It must not be confused with P2DB1, which means sensor C inside drive motor A. Volvo Trucks lists P0EF1 with failure type 09, component failure, for its electric trucks in remote diagnostic bulletin RD21-022; it names connector, wiring harness, the motor temperature sensor itself and an unsupported configuration as possible causes and sends the technician to Tech Tool for the detailed steps. The general code is used when the fault is not classified as low or high, which have their own codes P0EF3 and P0EF4. Without a usable winding temperature the controller has to protect motor C and limits its output.
Possible causes
- Loose, corroded or damaged connector of the motor C temperature sensor high
- Chafed or broken sensor wiring medium
- Temperature sensor in the winding failed medium
- Controller configuration not matching the installed motor (Volvo RD21-022) low
Symptoms
- Reduced drive power
- Warning lamp for the electric drive
- Motor temperature shown as invalid in the scan tool
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0EF1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.