OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0EF0

Battery Charger Coupler Unlock Disabled - High Voltage Present

P0EF0 describes a safety lockout rather than a broken actuator: the vehicle keeps the charging connector locked because it still measures hazardous voltage at the inlet. CharIN's CCS design guide permits unlocking only below 60 V, and EVgo's interoperability guide for vehicle makers asks for release once current is close to zero, the inlet is under 60 V DC and the station has changed to state B1. If the voltage does not decay, for instance because a DC charging contactor has welded, the station leaves its output live or the vehicle's voltage measurement is wrong, the lock stays engaged and the code is logged. No manufacturer documents P0EF0 publicly. Electrical faults of the lock actuator are P0D91 to P0D98. The driver cannot remove the cable until the voltage is gone.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / F0

Possible causes

  • DC charging contactor stuck closed, inlet stays connected to the battery medium
  • Charging station does not switch off or discharge its output medium
  • Faulty inlet voltage measurement reporting voltage that is not there medium
  • Charging control software ending the session in the wrong order low

Symptoms

  • Charging cable cannot be unplugged after charging
  • Charging fault message, sometimes only at certain stations
  • Emergency release of the connector needed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0EF0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication