P0EEE
Battery Charger Coupler Temperature B Too High
P0EEE is the overheating verdict for the second measuring point of the charging inlet: sensor B works electrically, but the contact it watches has become too hot, so charging is throttled or stopped. Electrical faults of sensor B have their own codes P0EE7 to P0EEB; overheating at point A is P0E5F, at points C and D P2E4E and P2E53. Ford documents P0EEE in special service message 55080 for certain Mustang Mach-E (2021 to 2023), E-Transit (2022 to 2025) and F-150 Lightning (2022 to 2023): DC fast charging at level 3 stations breaks off, and the vehicle stores P0EEE:27 together with P2E53:27 in the SOBDM. Ford traces this to module software, says a new charge port does not cure it and expects a software fix in Q3 2026; AC charging keeps working. Outside this case, worn or dirty pins are the usual cause.
Possible causes
- Software of the charging diagnostic module misjudging the temperature (Ford SSM 55080) high
- Worn, dirty or corroded pins in the charging inlet medium
- Loose crimp or screw connection behind the inlet pin raising contact resistance medium
- Worn plug of the charging station heating the contact low
Symptoms
- DC fast charging stops or does not start
- Charging power reduced while AC charging still works
- Charging fault message in the cluster or app
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0EEE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.