P0EEC
Battery Energy Control Module B Performance
P0EEC says a second battery energy control module, B, has failed its own internal checks. Large or split packs can carry more than one such controller, each watching cell voltages, temperatures and current of its part. No manufacturer documents P0EEC publicly. GM shows how the module A version P0A1F works: in its 2016 and 2019 hybrid tables a single software watchdog reset of the controller is enough, checked at 9 V or more, and the code is Type A, so the MIL lights after one trip. That a B module exists in practice is visible at Audi: on the Q5 and A7 PHEV, U041300 reports invalid data from Battery Energy Control Module B, and TSB 2065722/2 links it to software 106 or 206 in the battery junction box SX6. Network loss of the module is a U code; P0A1F covers module A.
Possible causes
- Software fault or watchdog reset in module B high
- Low or unstable 12 V supply to the module medium
- Internal hardware fault of module B low
Symptoms
- MIL or hybrid warning on
- Limited electric drive or charging
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0EEC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.