P0EEB
Battery Charger Coupler Temperature Sensor B Circuit Intermittent/Erratic
P0EEB catches a sensor B signal from the charging inlet that jumps or drops out for moments. A metal contact and its plastic housing have real thermal mass, so a change of many degrees within milliseconds cannot be a true temperature and points to the circuit. No manufacturer documents P0EEB publicly. A Mercedes bulletin about the first inlet sensor of the third-generation smart with its optional 22 kW unit fits the pattern: inlet sensor codes there came from loose low-voltage contacts at the charger, the fix was to work the plugs gently and watch whether charging starts, and the bulletin warns the fault may only appear with warm or cold parts at the start or end of charging. Typical for P0EEB is a session that stops without visible reason and works next time. Steady faults are P0EE9 and P0EEA.
Possible causes
- Loose contact in the sensor B circuit or at the charger plug high
- Moisture that comes and goes in the inlet connector medium
- Cracked sensor element with temperature-dependent contact low
Symptoms
- Charging stops sporadically
- Fault cannot be reproduced at once
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0EEB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.