P0EEA
Battery Charger Coupler Temperature Sensor B Circuit High
P0EEA is the opposite case: the sensor B signal of the charging inlet sits above the valid window. In a pull-up design that is what an unplugged connector, a broken sensor wire or a short to a supply voltage looks like. With a PT1000, whose resistance grows with heat, a high reading suggests an overheated contact, so the charger may stop at once; Sailtran fits PT1000 sensors at the DC+ and DC- pins of its CCS2 inlet. With an NTC it would read as far too cold, which hides real heating and is no safer. No manufacturer documents P0EEA publicly. For the A sensor, Bentley confirms on the 2024 Bentayga Hybrid that High is P0D9C and warns that the charger unit showed the wrong text, so diagnosis must follow the code number. P0EE9 is the low-signal sibling.
Possible causes
- Unplugged connector or broken sensor B wire high
- Signal wire shorted to a supply voltage medium
- Open sensor element B inside the inlet low
Symptoms
- Charging aborted at once or refused
- Fault in the charge indicator
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0EEA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.