P0EE9
Battery Charger Coupler Temperature Sensor B Circuit Low
P0EE9 reports that the voltage of coupler temperature sensor B lies under its valid window. What that means thermally depends on the element. An NTC thermistor loses resistance when heated, so a low signal reads as an extremely hot pin. The PT1000 platinum sensors that Sailtran places at the DC+ and DC- contacts of its CCS2 inlet behave the other way round, and in a pull-up circuit a low signal looks implausibly cold. A short to ground pulls the line down with either type, and water in the inlet can do the same. No manufacturer documents P0EE9 publicly. Bentley's TPI 2075291/1 for the 2024 Bentayga Hybrid shows for sensor A that Low is P0D9B, even though the charger unit 00C6 showed the texts of Low and High swapped. P0EEA is the high-signal sibling.
Possible causes
- Sensor B signal wire shorted to ground high
- Moisture or water in the charging inlet medium
- Shorted sensor element B low
Symptoms
- Charging not started or stopped
- Reduced charging power
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0EE9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.