P0EE7
Battery Charger Coupler Temperature Sensor B Circuit
P0EE7 is the general circuit code for the second temperature sensor of the charging inlet. High-current inlets carry several sensors; the supplier Sailtran fits one PT1000 at the L1 pin and two independent PT1000 at DC+ and DC- of its CCS2 inlet, so A and B often stand for two different contacts. The code applies when the sensor B circuit is faulty in a way the module does not sort into low, high or implausible. No manufacturer documents P0EE7 on an official server. For sensor A, Mercedes lists P0D9900 as an electrical fault of the inlet contact sensor on the smart electric drive with 22 kW charger and traces it to loose low-voltage plugs at the charger (LI54.10-P-067823). CARB requires plug-in charger faults that stop or slow charging to be found. Sensor A is P0D99.
Possible causes
- Loose low-voltage connector between inlet and charger high
- Damaged sensor wire in the inlet harness medium
- Failed sensor element B (usually means a new inlet) low
Symptoms
- Charging refused or stopped
- Charge indicator shows a fault
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0EE7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.