OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0EE5

A/C Refrigerant Distribution Valve B Control Circuit High

P0EE5 means the control line of refrigerant valve B carries more voltage than its commanded state allows. If the driver switches the coil to ground, a short to a 12 V feed is the classic reason; with some driver types an open coil can also float the line high. The practical effect depends on whether valve B is normally open or normally closed: either it cannot be energised any more, or it is energised when it should rest. No manufacturer documents P0EE5 publicly. Audi's A7 PHEV shows that valve B is watched by its own thermal management unit (J1024), and automotive shut-off valves of this kind run on 12 V or 24 V coils, according to Egelhof. CARB requires electrical checks of such battery thermal management outputs. P0EE4 is the low counterpart, P2613 the valve A code.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / E5

Possible causes

  • Control wire shorted to a 12 V feed high
  • Open coil letting the line float high medium
  • Faulty output stage in the controlling module low

Symptoms

  • Warning lamp on
  • Cabin or battery cooling not working as requested

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0EE5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication