P0EE4
A/C Refrigerant Distribution Valve B Control Circuit Low
P0EE4 is stored when the control line of refrigerant valve B is pulled to a lower voltage than the driver commands, usually by a short to ground. With a high-side driver the valve would then stay energised or the output would be overloaded; with a low-side driver the coil may be switched on permanently. No manufacturer documents P0EE4 publicly. The closest published case is the valve A sibling P2612, which Ross-Tech describes for Volkswagen models as a short to ground at the N280 compressor regulator valve, a coil of about 10 ohms with a moulded connector that can turn brittle and let the pins corrode. A similar check on the valve B coil and its connector is a sensible start. Open and high faults of valve B are P0EE3 and P0EE5.
Possible causes
- Control wire chafed through to ground high
- Brittle or corroded valve connector medium
- Coil winding shorted to the valve body low
Symptoms
- Warning lamp on
- Valve B behaves as if permanently energised or not at all
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0EE4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.