OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0EE2

A/C Refrigerant Distribution Valve B Stuck/Open

P0EE2 says the second refrigerant distribution valve, B, stays open or fails to close. In plug-in hybrids and EVs such shut-off valves route refrigerant either to the cabin evaporator or to a chiller that cools the battery; Egelhof sells solenoid versions with 12 V or 24 V coils for exactly this use. The fault is inferred, since the module sees pressures or temperatures that would not occur with the valve shut. Audi documents it on the A7 55 TFSI e (2021-2023): P0EE200 is stored in thermal management unit J1024, address 00C5, and the MIL comes on. TSB 2071040/1 blames the J1024 software and lists an SVM update from container 4K8909476J/K/L to 4K8909476V; the HV charging cable must be unplugged during flashing. Valve A stuck open is P0EC9.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / E2

Possible causes

  • Thermal management software misjudging the valve (Audi J1024) high
  • Valve seat contaminated or armature stuck open medium
  • Weak coil that no longer moves the armature low

Symptoms

  • MIL on
  • Weaker cabin or battery cooling
  • Often no noticeable effect beyond the warning

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0EE2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication