P0EE1
Hybrid/EV Battery Pack F Deterioration
P0EE1 is the last code of the P0E range for section ageing and covers section F. The series runs A (P0A7F) and B to F (P0EDD to P0EE1); for further sections J2012 continues in the P2 block, with G and H as P2CCC and P2CCD. Audi uses exactly this chain on the Q5 PHEV: groups 1 to 8 of the battery are reported as P0A7F00, P0EDD00 to P0EE100, P2CCC00 and P2CCD00 in unit 008C, and P0EE100 is group 6. The 2025 bulletins treat it like its siblings: confirm the MIL complaint, find no other measure in guided fault finding, replace the affected module. No other maker has published P0EE1. CARB's rule that fault codes should isolate the smallest replaceable unit explains why such long letter series exist for large packs. Section E is P0EE0.
Possible causes
- Module of battery group 6 aged high
- Section aged faster due to heat or poor cooling medium
- Evaluation error of the battery controller low
Symptoms
- MIL on
- Shorter electric range
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0EE1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.