OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0EE0

Hybrid/EV Battery Pack E Deterioration

With P0EE0 the controller reports ageing of section E, the fifth part of the traction battery. A section is usually a module or a group of cell blocks with its own monitoring; once its share of the pack has lost too much capacity or become too resistive, the whole battery can no longer reach its rated energy, which shows up first as shorter electric range. Audi is the only maker with published references: on the Q5 PHEV, P0EE000 means battery group 5 in unit 008C, and both the 2025 reporting obligation 2076982 and the module replacement bulletin 2079556 list it, intermittent or static. The first also names P0BBD, a voltage spread beyond the limit, which often goes along with a weak section. Distinguishing feature: only section E is named; sections D and F use P0EDF and P0EE1.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / E0

Possible causes

  • Capacity loss of battery group 5 high
  • Cell voltages in the section spread too far (often with P0BBD) medium
  • Faulty state-of-health estimate low

Symptoms

  • Electric range shown too low
  • Engine warning lamp on
  • Less power in electric mode

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0EE0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication