P0EDE
Hybrid/EV Battery Pack C Deterioration
P0EDE flags the third battery section, C, as worn out. The controller estimates each section's usable capacity and resistance from voltage behaviour under load and at rest; if section C drifts too far from its new-state values, it is judged deteriorated. CARB asks for a state-of-health monitor and for codes that point to the smallest part a workshop can replace, which is why a multi-module pack gets one code per section. Only Audi documents P0EDE publicly: on the Q5 PHEV it stands for battery group 3 in control unit 008C. A February 2025 reporting obligation, 2076982/1, lists it with the yellow engine lamp and a displayed electric range that is too low, and asks dealers to call technical support before replacing parts. Sections B and D have P0EDD and P0EDF.
Possible causes
- Cells in battery group 3 aged (capacity loss, higher resistance) high
- Strong voltage spread inside the section medium
- Controller estimate wrong, module still healthy low
Symptoms
- Check engine lamp on
- Displayed electric range too low
- Electric driving mode cannot be selected or ends early
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0EDE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.