OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0EDD

Hybrid/EV Battery Pack B Deterioration

P0EDD is the state-of-health verdict for the second section of a traction battery: section B has lost so much capacity or gained so much internal resistance that it falls below the maker's limit. P0A7F covers section A, P0EDE to P0EE1 sections C to F. Audi counts the Q5 PHEV (2020-2024) battery in groups and names P0EDD00 as group 2 deterioration in the battery management unit 008C; with the MIL on and guided fault finding silent, TSB 2079556/1 says to renew the module named by the entry. FCA uses the code on the Pacifica Hybrid: 08-299-25 extends warranty and replaces the 400 V pack, while a 2025 STAR case first checks fuses, wiring and BPCM software, then resets P0EDD in the BPCM. On the 2021 Wrangler, 08-168-23 calls it a false MIL fixed by BPCM software.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / DD

Possible causes

  • Battery module or cell group in section B aged beyond its limit high
  • Battery controller software misjudging state of health (FCA reflash cases) medium
  • Pack defect covered by a warranty extension (Pacifica Hybrid) low

Symptoms

  • MIL or hybrid system warning on
  • Noticeably shorter electric range
  • Engine runs more often, less electric assist

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0EDD

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication