OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0ED5

Generator Phase X Current Low

P0ED5 means that phase X of the hybrid generator carries, or appears to carry, too little current while the generator is supposed to deliver torque. No manufacturer documents P0ED5 publicly. Mitsubishi publishes a comparable check for the U, V and W phases of the 2023 Outlander PHEV: with at least 50 A requested and the generator between 500 and 4,500 rpm, a phase current that stays within roughly 17 A of zero for 0.4 s sets P0E0C, as does a failed comparison with the target current. In phase X the same result comes from a broken phase cable, a burnt winding joint, an inverter switch that never conducts, or a current sensor stuck at its zero point. P0ED6 is the high case; the low codes of phases Y and Z are P0ED8 and P0EDB. Generator torque and charging suffer.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / D5

Possible causes

  • Open or loose phase X cable or terminal high
  • Inverter power switch for phase X not conducting medium
  • Burnt or broken winding connection in the generator low
  • Current sensor stuck near zero low

Symptoms

  • Weak or no battery charging by the generator
  • Rough engine start or vibration from the generator
  • MIL and hybrid warning

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0ED5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication