P0ED4
Generator Phase X Current
P0ED4 is the general current fault for phase X of the hybrid generator. J2012 names the generator phases U, V and W and adds a separate X, Y, Z series, which presumably serves machines with a second three-phase winding set fed by its own inverter bridge; which vehicles use it is not published, and no manufacturer documents P0ED4. Low and high cases are P0ED5 and P0ED6. Ford explains the role of its U-V-W codes on its 2019 power-split hybrids: the inverter is checked for overcurrent, current sensor and current regulation faults, and generator problems of this kind are stored as P0A6F, P0A72, P0A75 or their high variants. CARB requires electric drive components to be monitored. A faulty phase current limits generator output, engine start and charging.
Possible causes
- Fault in the inverter bridge or current regulation for phase X high
- Phase X current sensor out of tolerance medium
- Loose or damaged high-voltage connection of phase X medium
Symptoms
- Hybrid system warning and MIL
- Reduced charging, engine may start less smoothly
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0ED4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.