OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0ED3

Hybrid/EV Battery F Voltage High

P0ED3 is logged once battery F of the hybrid/EV system climbs above its permitted maximum voltage. It is the high member of the F series, next to P0ED2 (low) and P0ED1 (unstable). No manufacturer documents P0ED3 publicly. GM's hybrid tables show how strictly overvoltage is treated at pack level: above 479 V the P0ABD monitor fails within one trip. Ford sets P0AFB when its pack stays above 362.2 V on plug-in or 327.8 V on full hybrids for 10 seconds. Within a single unit an excess voltage usually means its cells were charged further than the rest, for instance because the balancing circuit of that unit quit, or that its measuring channel reads high. Charging and regeneration stay restricted until the cause is found; a warning appears and plug-in charging may be refused.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / D3

Possible causes

  • Balancing circuit of unit F failed, cells overcharged high
  • Measuring channel of unit F reading too high medium
  • Charger or regeneration control overshooting low

Symptoms

  • Charging refused or regenerative braking weak
  • MIL and battery warning

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0ED3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication