OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0ED2

Hybrid/EV Battery F Voltage Low

P0ED2 means hybrid/EV battery F delivers less voltage than the controller predicts from current draw and state of charge. No manufacturer documents P0ED2 publicly. Published undervoltage limits exist for whole packs: GM's hybrid tables fail the pack below 24 V (P0ABC), and Ford sets P0A7D during cranking if its pack reads under 184.8 V on plug-in or 167.2 V on full hybrids, or if the weakest cell drops below 2.1 V for half a second. For one unit the limits scale with its number of cells. Typical causes are an aged module with lost capacity, a cell with internal leakage that drained during standstill, or a high-resistance joint that loses voltage under load. Discharge power is cut back. High voltage of unit F is P0ED3, low voltage of unit E is P0ECE.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / D2

Possible causes

  • Aged module in unit F with lost capacity high
  • Cell with internal leakage drained during standstill medium
  • High-resistance connection inside unit F dropping voltage under load medium

Symptoms

  • Less power in electric mode
  • Shorter electric range
  • MIL and battery warning

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0ED2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication