OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0ED1

Hybrid/EV Battery F Voltage Unstable

P0ED1 reports that the voltage of hybrid/EV battery F fluctuates beyond the permitted band instead of staying steadily off, which would be P0ED2 or P0ED3. No manufacturer documents P0ED1 publicly. CARB not only requires every cell and voltage sensor of the storage to be watched, it also asks for proof that cell balancing can hold each cell at its intended voltage, and an unsteady unit voltage is often the first hint that a cell group is running away from the others. Ford's comparable test for battery A uses a 0.5 V spread between one cell and the average, held for 15 seconds. Mechanical causes such as a loose busbar or a sense lead with poor contact make the reading jump with vibration. General code of unit F: P0ED0; the same fault on unit E: P0ECD.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / D1

Possible causes

  • Cell group of unit F drifting because balancing cannot keep up high
  • Loose busbar or cell connector medium
  • Sense lead or connector with intermittent contact medium

Symptoms

  • Warning that comes and goes, often over bumps or under load
  • Short power reductions while driving
  • MIL on

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0ED1

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication