P0ED0
Hybrid/EV Battery F Voltage
P0ED0 is the general voltage code of hybrid/EV battery F, the sixth and last unit in this letter series. It reports an implausible voltage of the unit without separating unstable (P0ED1), low (P0ED2) and high (P0ED3) readings. Only storage systems divided into six or more separately monitored units can produce it, and no manufacturer documents P0ED0 publicly. Ford's 2019 hybrid BECM is an example of finely divided monitoring: it supervises the cells in groups of six per sense circuit and fails a circuit when any cell reads above 5 V or below 1 V for 11 seconds. CARB demands that the cells and voltage sensors of the energy storage are monitored with codes for the smallest replaceable unit. A battery warning and reduced power follow.
Possible causes
- Aged or damaged cells in unit F medium
- Open or high-resistance voltage sense lead of unit F medium
- Cell monitoring electronics or software fault low
Symptoms
- MIL and battery warning
- Reduced electric power
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0ED0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.