P0ECF
Hybrid/EV Battery E Voltage High
P0ECF is stored when unit E of the hybrid/EV battery exceeds its upper voltage limit. It mirrors P0ECE, while unstable readings belong to P0ECD. No manufacturer documents P0ECF publicly. Ford's overcharge logic for its 2019 hybrids gives a sense of the limits involved: with the charge contactors open, a cell above 4.5 V on plug-in models or 4.35 V on full hybrids for 2 or 3 seconds counts as a fault under the state-of-charge code P0C30. Overvoltage in one unit typically follows broken cell balancing, a fault in charge or regeneration control, or a measuring channel that reads high. Because overcharged lithium cells are a safety risk, the controller blocks charging and regenerative braking and may open the contactors. Plug-in charging may be refused.
Possible causes
- Cell balancing of unit E no longer works, group overcharged high
- Charge or regeneration control error medium
- Voltage sense channel reading too high medium
Symptoms
- Charging or regenerative braking blocked
- Battery warning, MIL
- Vehicle may switch off the high-voltage system
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0ECF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.