P0ECC
Hybrid/EV Battery E Voltage
P0ECC is the general voltage code for hybrid/EV battery E. The letters A to F mark separately monitored sub-batteries, modules or energy stores of one system; E is the fifth, so the code can only occur where a manufacturer divides its storage into at least five such units. It signals a voltage of this unit that does not fit expectation, without saying whether it fluctuates (P0ECD), sits too low (P0ECE) or too high (P0ECF). No manufacturer documents P0ECC publicly. CARB asks for monitoring of the cells and voltage sensors of hybrid storage with codes that name the smallest replaceable unit, which explains such letter series. As a pack-level reference, GM's P0ABB compares pack voltage with the cell sum at a 12 V limit. The driver sees a battery warning.
Possible causes
- Aged or damaged cells in unit E medium
- Fault in the voltage sense leads or connectors of unit E medium
- Battery controller measuring or software fault low
Symptoms
- Battery or hybrid warning, MIL
- Reduced electric power and range
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0ECC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.