OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0EC9

A/C Refrigerant Distribution Valve A Stuck/Open

P0EC9 reports that refrigerant distribution valve A, a solenoid valve that splits refrigerant between branches of the A/C circuit, stays open or does not close on command. Such a fault is usually detected indirectly, because pressure or temperature behind the valve fails to react when it should be shut. Audi uses the code on the 2016 A3 Sportback e-tron: P0EC900 is logged passive/sporadic in the Climatronic module J255, and the MIL is switched on at the request of another module over the network, so the engine module J623 holds no code. Bulletins 2046942 and 2047037 trace it to a miscalculation in the refrigerant self-test and call for new J255 software; if the code returns after erasing, it has to be diagnosed as a real fault. Circuit faults of valve A are P2611 to P2613, valve B stuck open is P0EE2.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / C9

Possible causes

  • Faulty self-test calculation in the climate control software (Audi A3 e-tron, fixed by update) high
  • Valve held open by dirt, debris or a sticking armature medium
  • Weak solenoid coil that no longer pulls the valve fully shut low

Symptoms

  • MIL on without a code in the engine control module
  • Code stored passive/sporadic in the climate control module
  • Reduced or uneven cooling in one branch, or no noticeable change at all

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0EC9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication