P0EC7
A/C Power Supply Relay Control Circuit Low
P0EC7 is set when the control line of the relay feeding the A/C reads too low a voltage, usually because it is shorted to ground. What the driver feels depends on how the coil is switched: with a low-side driver a grounded line can keep the relay energised even with the A/C off, while with a high-side driver the relay simply cannot be switched on. No manufacturer documents P0EC7 publicly. As a comparison, Mitsubishi monitors a relay-fed supply on its throttle actuator (P0657): with battery voltage above 8.3 V, the switched line must not sit at or below 6.0 V for 0.35 seconds. Open-circuit code: P0EC6; high counterpart: P0EC8; clutch relay analogue: P0646.
Possible causes
- Relay control line chafed and shorted to ground high
- Shorted turns in the relay coil medium
- Output stage of the module stuck low low
Symptoms
- A/C power stays on with A/C switched off, or never switches on
- Possible battery drain while parked if the relay stays energised
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0EC7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.