P0EC5
A/C Compressor Motor Speed Sensor Range/Performance
P0EC5 means the speed information of the electrically driven compressor motor is implausible: the motor does not turn at the speed the controller expects, or the reported value contradicts other data. Mazda uses the code on the 2024 to 2026 CX-90 PHEV and 2025 to 2026 CX-70 PHEV, describing P0EC5:00 in the PCM as an error signal coming from the compressor. Bulletin 07-002/26b lists it beside P0D6D, U0605 and P0AA6 when an overcurrent shorts the compressor internally and the high-voltage A/C fuse blows; the A/C then stops cooling. GM's 2011 Volt ran a similar test as P1F0A, Type B: fault if the spinning motor stays below 1800 rpm for 20 seconds.
Possible causes
- Internal short in the electric compressor after overcurrent (Mazda PHEV) high
- Blown high-voltage A/C fuse cutting compressor power medium
- Mechanical drag or lack of oil keeping the motor below target speed low
Symptoms
- A/C does not cool
- Accompanying compressor voltage, communication or insulation codes
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0EC5
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.