OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0EC4

A/C Refrigerant Temperature Sensor B Range/Performance

P0EC4 is a plausibility fault: sensor B delivers a voltage inside its normal window, yet the temperature it reports does not agree with other information. No manufacturer documents P0EC4 publicly. A well-described pattern comes from GM's 2012 Volt (P153B, Type B): once the compressor has been off for over an hour, the low-side refrigerant temperature must lie within 10 degrees Celsius of the raw ambient temperature and of the value derived from high-side pressure; the check runs only when no circuit codes are active. A drifting sensor, poor thermal contact or a wrong charge can fail such a comparison. The A/C usually still works but may be controlled poorly. Electrical faults of sensor B: P0EC1 to P0EC3.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / C4

Possible causes

  • Sensor B drifting out of tolerance high
  • Sensor not seated properly on the pipe, poor thermal contact medium
  • Incorrect refrigerant charge shifting the comparison values low

Symptoms

  • Uneven or weak cooling, compressor cycling oddly
  • Fault often appears only after a long standstill

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0EC4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication