P0EC2
A/C Refrigerant Temperature Sensor B Circuit High
With P0EC2 the signal of refrigerant temperature sensor B is stuck near the reference voltage. An NTC thermistor would only get there at extreme cold, so an open circuit somewhere in the loop is far more likely. No manufacturer documents P0EC2 publicly. Mitsubishi's procedure for the analogous evaporator outlet sensor of the Outlander PHEV shows the logic: the A/C amplifier sets its open-circuit code after 4 seconds of high input while READY is on or the battery is charging, and the technician measures about 5 V at the unplugged connector and checks both lines for continuity under 2 ohms. A false cold reading may lock out heating or cooling. Low counterpart: P0EC3.
Possible causes
- Open signal or ground line between sensor B and module high
- Connector not fully seated after A/C work medium
- Sensor B open internally medium
Symptoms
- Very low refrigerant temperature shown for sensor B
- Heating via heat pump or cooling unavailable
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0EC2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.