P0EC1
A/C Refrigerant Temperature Sensor B Circuit
P0EC1 covers a circuit fault of a second refrigerant temperature sensor, found mainly on electrified cars whose heat pump or battery chiller measures the refrigerant at several points. The module receives no usable value from sensor B. No manufacturer publishes P0EC1 or says which of its sensors counts as B. Volkswagen's e-Golf shows how such networks look: up to five combined pressure/temperature senders (G395, G826 to G829) share two LIN lines, and because early parts could not be auto-addressed, bulletin 87-17-02 requires replacing every sender on the affected line. Without B the heat pump or A/C may shut down. Detailed faults of sensor B: P0EC2 to P0EC4; sensor A: P0EBC.
Possible causes
- Failed sensor B or combined pressure/temperature sender high
- Wiring, connector or shared LIN line fault medium
- Mixed part versions on one LIN line after a repair low
Symptoms
- Heat pump or A/C switched off or limited
- Fault stored in the climate control module
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0EC1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.