OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0EC0

A/C Compressor Motor Phase W Current Sensor Circuit

P0EC0 is the umbrella circuit code for the phase W current sensor in the inverter of an electric A/C compressor. It applies when no valid W-phase value arrives at all, without a split into high, low or implausible; those cases have their own codes P0EB8 to P0EBA. Like the phase V circuit code P0EBB it is numbered out of sequence. No manufacturer documents P0EC0 publicly. For orientation, GM's 2011 Volt checked each compressor phase with the motor stopped and set a fault when the W reading stayed beyond plus or minus 68 A in 30 of 60 samples (older codes P0D7E and P0D7F, Type B, 12 V reset needed). Without the W value the motor control cannot run the compressor. U-phase circuit code: P0EB1.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / C0

Possible causes

  • Interrupted W-phase sensing path inside the inverter medium
  • Failed W-phase current sensor or inverter board high
  • Missing supply voltage for the current sensors low

Symptoms

  • Electric A/C compressor does not start
  • No cabin cooling, battery cooling via refrigerant may be limited

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0EC0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication