P0EBE
A/C Refrigerant Temperature Sensor A Circuit Low
P0EBE is logged when the voltage from refrigerant temperature sensor A falls close to zero. For an NTC element a low voltage stands for high temperature, so the controller sees refrigerant that seems far too hot. Real heat at that level is unlikely; a signal wire chafed through to ground or a thermistor shorted internally is the usual finding. No manufacturer publishes P0EBE. GM's 2012 Volt reacts to its evaporator refrigerant sensor below 2 percent of the reference (about 0.1 V) in 40 of 50 samples as P0537, Type B, which shows how such a check is built. Expect the compressor to be held off as protection. High-voltage fault of this sensor: P0EBD.
Possible causes
- Signal wire chafed and shorted to ground high
- Thermistor shorted internally medium
- Moisture bridging the connector pins low
Symptoms
- A/C compressor switched off as a precaution
- Live data shows an unrealistically hot refrigerant
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0EBE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.