P0EBD
A/C Refrigerant Temperature Sensor A Circuit High
P0EBD means the signal voltage of refrigerant temperature sensor A sits at the top of its range. With the usual NTC thermistor that equals an extremely cold reading, and in practice it points to an open signal path, a disconnected plug or a short to the reference voltage. No manufacturer documents P0EBD publicly. As a comparison for the same kind of sensor, GM's 2012 Volt flags its evaporator refrigerant sensor above 98 percent of the 5 V reference (about 4.9 V) in 40 of 50 samples, Type B, under P0538. Mitsubishi's Outlander PHEV treats a high input lasting 4 seconds as an open circuit. A wrong cold value can block compressor operation. The low-voltage counterpart is P0EBE.
Possible causes
- Open signal or ground wire, or unplugged connector high
- Thermistor open internally medium
- Signal wire shorted to the reference or supply voltage low
Symptoms
- Compressor stays off or A/C output is reduced
- Implausibly low refrigerant temperature in live data
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0EBD
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.